Company Introduction
Jiangyin Jiaxin Energy Technology Co., Ltd. is a professional manufacturer of solar PV brackets. The factory is located in Xuxiake Town, Jiangyin City, Jiangsu Province.
We provide professional, efficient, and comprehensive one-stop solar bracket solutions for you. Our main products include: solar brackets for roof or ground，BIPV waterproof solar brackets, solar bracket parts, etc. The factory has a production scale of 1000MW aluminum solar brackets, with its own aluminum extrusion line and precision machining workshop. The product quality is strictly controlled.
We can also provide customized solutions and products for customers to meet different market demands.
|
|
|
Low cost, Short construction period, Long service life
Long service life
Solutions for Solar PV Power Generation Engineering
Tile Roof Bracket Steel Tile Roof Bracket BIPV Bracket Flat Roof Bracket Steel Tile Roof Bracket Ground Bracket |
Common Treatment Methods and Principles for Installing Photovoltaic Systems on Household Glazed Tile Roofs
1. Prioritize structural integrity: Verify roof load-bearing capacity, and reinforce old buildings if necessary.
2. Waterproof pre-treatment: Use a dual protection system of "stainless steel hook brackets + waterproof adhesive" on the roof.
3. Optimize lighting: Install in a south/southwest orientation, generally laying flat along the roof surface.
4. Lightning protection and grounding: Ensure reliable connection between brackets and building lightning protection system.
|
|
Stainless Steel Hook + Aluminum Rail Bracket
|
|
Glazed Tile Roof PV Mounting Solution
|
|
Glazed Tile Roof PV Mounting Solution
|
|
Concrete Tile Roof Hook Installation Method
|
|
Concrete Tile Roof Hook Installation Method
|
|
Tile Roofing Hook Bracket
|
|
Tile roof hook bracket (Adjustable leveling hook)
Common processing methods and principles for installing photovoltaic power generation systems on industrial and commercial color steel tile roofs
① Prioritize structure, verify roof load-bearing capacity, and reinforce old buildings; ② Conduct waterproof pretreatment, adopt the "color steel tile clamp + bracket" solution for the roof, use clamps for color steel tiles to avoid drilling, and ensure a slope of >5° to prevent water accumulation; ③ Optimize lighting, lay flat for south-facing installations, and use angle-raising brackets for north-facing installations to tilt the photovoltaic panels southward to increase power generation; ④ Implement lightning protection and grounding, ensuring reliable connection between brackets and building lightning protection belts;
|
|
彩钢瓦夹具L脚固定支架
|
|
H型导轨连接件
|
|
角驰彩钢瓦光伏支架
|
|
直立锁边型夹具支架
|
|
直立锁边型夹具支架
|
|
角驰III型夹具支架
|
|
30*40铝合金导轨支架
Common processing methods and principles of Building-integrated Photovoltaics (BIPV)
BIPV aluminum alloy waterproof bracket: The W-shaped water guide slot and U-shaped water guide slot are crisscrossed, achieving a waterproof installation effect for photovoltaics. The waterproof photovoltaic bracket is made of aluminum alloy, with silicone sealant applied at the joints to ensure structural safety, smooth drainage, and convenient construction.
|
|
工业厂房人字形屋顶BIPV防水支架
|
|
人字坡屋顶BIPV防水光伏支架
|
|
人字坡屋面BIPV光伏防水支架
|
|
彩钢瓦屋面M型导水槽光伏支架
|
|
弧形防水导轨BIPV光伏支架
|
|
弧形铝合金光伏防水导轨
|
|
W形铝合金光伏防水导轨
|
|
M形铝合金光伏防水导轨
|
|
M形铝合金光伏防水导轨（导水槽）
混凝土平面屋顶光伏安装系统 常用处理方法及原则
针对混凝土平面屋顶光伏安装系统，我们优先采用膨胀螺栓固定支架，穿透点用防水套管+密封胶处理，或配重块压载式非穿透安装。支架选用高强度铝合金和不锈钢紧固件，确保排水坡度≥3%，避免积水，卷材加强层补偿防水层破坏。
|
|
混凝土平屋顶铝合金光伏支架
|
|
混凝土平屋顶铝合金光伏支架
|
|
混凝土平屋顶铝合金光伏支架
|
|
混凝土平屋顶铝合金光伏支架（角铝支架）
|
|
混凝土平屋顶铝合金光伏支架（角铝支架）
|
|
混凝土平屋顶铝合金光伏支架（角铝支架）
|
|
混凝土平屋顶铝合金光伏支架（角铝可调角度支架）
|
|
混凝土平屋顶铝合金光伏支架（角铝支架）
|
|
混凝土平屋顶铝合金光伏支架（角铝支架）
|
|
混凝土平屋顶铝合金光伏支架（压载式支架）
|
|
混凝土平屋顶铝合金光伏支架（压载式支架）
|
|
混凝土平屋顶铝合金光伏支架（压载式支架）
梯形彩钢瓦屋面光伏安装系统 常用处理方法及原则
梯形彩钢瓦屋面光伏安装，一是采用梯形夹具夹持波峰打钉固定，但需加防水橡胶垫或打胶防水，避免屋面漏水。二是采用非穿透式安装，如使用AB强力结构胶粘于彩钢瓦。该光伏支架用高强度铝合金和不锈钢紧固件。
|
|
梯形彩钢瓦屋面L脚支架方案
|
|
梯形彩钢瓦屋面U型导轨支架方案
|
|
梯形彩钢瓦屋面U型底座+H型导轨支架方案
|
|
梯形彩钢瓦屋面L脚支架方案
|
|
梯形彩钢瓦屋面U型底座+H型导轨支架方案
|
|
梯形彩钢瓦屋面L脚支架方案
|
|
梯形彩钢瓦屋面L脚支架方案
|
|
梯形彩钢瓦屋面梯形夹具+导轨支架方案
|
|
梯形彩钢瓦屋面U型导轨支架方案
双排/多排立柱光伏安装系统 常用处理方法及原则理工程
双排/多排立柱光伏安装，优先采用混凝土灌注桩或预制桩基础，确保立柱间距均匀，适应地质条件。立柱选用高强度铝合金，通过预埋螺栓或膨胀螺栓固定，底部设防水套管 + 密封胶防渗透。支架采用可调式节点，确保排水坡度≥3%，避免积水。
|
|
JX018混凝土屋面光伏支架系统
|
|
平屋顶铝合金光伏支架
|
|
混凝土平屋顶多排立柱铝合金光伏支架
|
|
混凝土平屋顶多排立柱铝合金光伏支架
|
|
混凝土平屋顶多排立柱铝合金光伏支架
|
|
混凝土平屋顶立柱铝合金光伏支架
|
|
地面安装多排立柱铝合金光伏支架
|
|
混凝土屋顶安装多排立柱铝合金光伏支架
|
|
混凝土屋顶安装多排立柱铝合金光伏支架
|
|
混凝土屋顶安装多排立柱铝合金光伏支架
|
|
混凝土屋顶安装多排立柱铝合金光伏支架
|
|
混凝土屋顶安装多排立柱铝合金光伏支架
|
|
混凝土屋顶安装铝合金光伏支架
|
|
混凝土屋顶安装铝合金光伏支架
|
|
地面安装铝合金光伏支架
|
|
|
|
|
|
|
|
|
|